Alena Vimmrová

doc. Ing. Alena Vimmrová, Ph.D.

doc. Ing. Alena Vimmrová, Ph.D.

Vice Head of Department

Email

vimmrova@fsv.cvut.cz

Phone

2 2435 7126

Office

A329

Academic qualifications
2015 Associate professor in area Theory of Building Structures and Materials, thesis: New Materials Based on Calcium Sulphate
2007 Doctoral degree (Ph.D.), Faculty of Civil Engineering, CTU Prague, Field of study: Physical and Materials Engineering, Ph.D. thesis:Formulation of Gypsum Foam Materials
2015 Master degree (Ing.), Faculty of Civil Engineering, CTU Prague, Field of study:Civil Engineering, specialization in structural and dynamical analysis of structures
Employment and practice
2016 Associate  Professor, Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague
from 1998 Deputy Head of department, Department of Materials Engineering and Chemistry, Faculty of Civil Engineering, Czech Technical University in Prague
1993-1998 Assistent professor, Department of Building Materials, Faculty of Civil Engineering, Czech Technical University in Prague
1992-1993 Private consultant
1985-1992 Assistant, Research Institute of Structural Engineering, Department of Concrete Structures, Prague
Research activity
Experimental and theoretical analysis of mechanical and thermal properties of the gypsum-based materials. Design and development of the calcium sulphate based composites.
Doleželová, M., Krejsová, J., Scheinherrová, L., Keppert, M., Vimmrová, A.
Investigation of environmentally friendly gypsum based composites with improved water resistance
Journal of Cleaner Production. 2022, 370, 133278. ISSN 0959-6526.
https://doi.org/10.1016/j.jclepro.2022.133278

Scheinherrová, L., Doleželová, M., Vimmrová, A., Vejmelková, E., Jerman, M., Pommer, V., Černý, R.
Fired clay brick waste as low cost and eco-friendly pozzolana active filler in gypsum-based binders
Journal of Cleaner Production. 2022, 368, 133142. ISSN 0959-6526.
https://doi.org/10.1016/j.jclepro.2022.133142

Doleželová, M., Scheinherrová, L., Krejsová, J., Keppert, M., Černý, R., Vimmrová, A.
Investigation of gypsum composites with different lightweight fillers
Construction and Building Materials. 2021, 297, 123791. ISSN 0950-0618.
https://doi.org/10.1016/j.conbuildmat.2021.123791

Doleželová, M., Scheinherrová, L., Vimmrová, A.
Study of gypsum composites with fine solid aggregates at elevated temperatures
Science and Engineering of Composite Materials. 2021, 28(1), 237-248. ISSN 2191-0359.
https://doi.org/10.1515/secm-2021-0025

Doleželová, M., Krejsová, J., Vimmrová, A.
Adhesive strength of gypsum composites with lightweight fillers
U.Porto Journal of Engineering. 2021, 4(2), 52-59. ISSN 2183-6493.
https://doi.org/10.24840/2183-6493_007.002_0007

Vimmrová, A., Krejsová, J., Scheinherrová, L., Doleželová, M., Keppert, M.
Changes in structure and composition of gypsum paste at elevated temperatures
Journal of Thermal Analysis and Calorimetry. 2020, 2020 ISSN 1388-6150.
https://doi.org/10.1007/s10973-020-09528-8

Krejsová, J., Heralová R.S., Doleželová, M., Vimmrová, A.
Environmentally friendly lightweight gypsum-based materials with waste stone dust
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS. 2019, 233(3), 258-267. ISSN 1464-4207.
https://doi.org/10.1177/1464420719826163

Krejsová, J., Doleželová, M., Pernicová R., Svora P., Vimmrová, A.
The influence of different aggregates on the behavior and properties of gypsum mortars
Cement and Concrete Composites. 2018, 2018(92), 188-197. ISSN 0958-9465.
https://doi.org/10.1016/j.cemconcomp.2018.06.007

Doleželová, M., Scheinherrová, L., Krejsová, J., Vimmrová, A.
Effect of high temperatures on gypsum-based composites
Construction and Building Materials. 2018, 2018(168), 82-90. ISSN 0950-0618.
https://doi.org/10.1016/j.conbuildmat.2018.02.101

Doleželová, M., Krejsová, J., Vimmrová, A.
LIGHTWEIGHT GYPSUM BASED MATERIALS: METHODS OF PREPARATION AND UTILIZATION
International Journal of Sustainable Development and Planning. 2017, 12(2), 326-335. ISSN 1743-7601.
https://doi.org/10.2495/SDP-V12-N2-326-335

Vimmrová, A., Kočí, V., Krejsová, J., Černý, R.
A Method for Optimizing Lightweight-Gypsum Design Based on Sequential Measurements of Physical Parameters
Measurement Science Review. 2016, 16(3), 160-166. ISSN 1335-8871.
https://doi.org/10.1515/msr-2016-0019

Nazmunnahar M., Del Val J.J., Vimmrová, A., González J.
Microstructural and Magnetic Properties of Ni50Mn39Sn11 and Ni50Mn36Sn14 Heusler Alloys
International Journal of Chemical, Nuclear, Metallurgical and Materials Engineering. 2015, 9(5), 716-720. ISSN 1307-6892.

Vimmrová, A., Doleželová, M., Černý, R.
Ternární směsi na bázi sádry se zlepšenými mechanickými vlastnostmi
Stavební obzor. 2014, 23(7-8), 126-131. ISSN 1805-2576.

Vimmrová, A., Nazmunnahar M., Černý, R.
Lightweight gypsum-based materials prepared with aluminum powder as foaming agent
Cement Wapno Beton. 2014, 19/81(5), 299-307. ISSN 1425-8129.

Vimmrová, A., Michalko O., Černý, R., Keppert, M.
Calcined gypsum-lime-metakaolin binders: Design of optimal composition
Cement and Concrete Composites. 2014, 52 91-96. ISSN 0958-9465.
https://doi.org/10.1016/j.cemconcomp.2014.05.011

Vimmrová, A., Keppert, M., Svoboda L., Černý, R.
Lightweight gypsum composites: design strategies for multi-functionality
Cement and Concrete Composites. 2011, 33(1), 84-89. ISSN 0958-9465.
https://doi.org/10.1016/j.cemconcomp.2010.09.011

Toman, J., Vimmrová, A., Černý, R.
Long-Term On-Site Assessment of Hygrothermal Performance of Interior Thermal Insulation System without Water Vapour Barrie
Energy and Buildings. 2009, 41(1), 51-55. ISSN 0378-7788.
https://doi.org/10.1016/j.enbuild.2008.07.007

Vimmrová, A., Svoboda L.
Příprava pěnové sádrové hmoty pomocí kyselého činidla
Stavební obzor. 2008, 17(9), 277-279. ISSN 1210-4027.

Vimmrová, A., Svoboda L.
Hybridně lehčená sádrová hmota
Stavební obzor. 2008, 17(1), 8-10. ISSN 1210-4027.