Martin Böhm

doc. Ing. Martin Böhm, Ph.D.

doc. Ing. Martin Böhm, Ph.D.

Email

martin.bohm@fsv.cvut.cz

Telefon

2 2435 7128

Kancelář

A317

Vzdělání

2012 doc., Fakulta lesnická a dřevařská, ČZU v Praze, obor Technika v lesním hospodářství a zpracování dřeva, Habilitační práce: Hodnocení obsahu a úniku formaldehydu z materiálů na bázi dřeva

2008 Ph.D., Fakulta lesnická a dřevařská, ČZU v Praze, obor Technika a mechanizace v lesním hospodářství, Disertační práce: Vliv vlhkosti na mechanické a fyzikální vlastnosti OSB desek

2002 Ing., Fakulta lesnická a environmentální, ČZU v Praze, obor Dřevařské inženýrství, Diplomová práce: Vlhkostní roztažnost podlahových materiálů

Zaměstnání a praxe

2019

Docent, Katedra materiálového inženýrství a chemie, Fakulta stavební, ČVUT v Praze

2016 - 2018

Docent, Katedra dřevěných výrobků a konstrukcí, Fakulta lesnická a dřevařská, ČZU v Praze

2014 - 2015

Výzkumná stáž v rámci Fulbright-Masarykova programu, College of Natural Resources, NC State University Raleigh

2013 - 2014

Vedoucí katedry dřevěných výrobků a konstrukcí, Fakulta lesnická a dřevařská, ČZU v Praze

2007 - 2012

Odborný asistent, Katedra zpracování dřeva, Fakulta lesnická a dřevařská, ČZU v Praze

2004

Tajemník ředitele, České dřevařské závody Praha

   
Výzkumná činnost

Hodnocení struktury a vlastností dřeva, optimalizace materiálů na bázi dřeva a kompozitů z přírodních vláken pro daný účel použití, modifikace lepících směsí a povrchových úprav.

 

Bakalářské předměty

Magisterské předměty

Hodoušek, M.; Böhm, M.; Součková, A.; Herrero, M.E.; Oberhofnerová, E.
Application of Paints to Decrease Air Permeability of Oriented Strand Boards
Maderas-Ciencia y Tecnologia. 2019, 21(1), 105-112. ISSN 0718-221X.
https://doi.org/10.4067/S0718-221X2019005000110

Hýsek, S.; Podlena, M.; Bartsch, H.; Wenderdel, C.; Böhm, M.
Effect of wheat husk surface pre-treatment on the properties of husk-based composite materials
Industrial Crops and Products. 2018, 125 105-113. ISSN 0926-6690.
https://doi.org/10.1016/j.indcrop.2018.08.035

Hýsek, S.; Trgala, K.; Fidan, H.; Pánek, M.; Lexa, M.; Böhm, M.; Veverka, J.
Ultrasound Measurement of Exterior Wood Coating Thickness
Maderas-Ciencia y Tecnologia. 2018, 20(4), 671-680. ISSN 0718-221X.
https://doi.org/10.4067/S0718-221X2018005041301

Oberhofnerová, E.; Hýsek, S.; Pánek, M.; Böhm, M.
Effect of artificial weathering and temperature cycling on the performance of coating systems used for wooden windows
Journal of Coatings Technology and Research. 2018, 15(4), 851-865. ISSN 1945-9645.
https://doi.org/10.1007/s11998-017-0033-4

Hýsek, S.; Fidan, H.; Pánek, M.; Böhm, M.; Trgala, K.
Water Permeability of Exterior Wood Coatings: Waterborne Acrylate Dispersions for Windows
Journal of Green Buildings. 2018, 13(3), 3-16. ISSN 1552-6100.

Procházka, J.; Beránek, T.; Beránková, J.; Bomba, J.; Böhm, M.
Synergistic Effects of Impregnation Agents Used in Plywood Production Relative to the Shear Strength of Bonded Joints
Bioresources. 2018, 13(4), 7232-7243. ISSN 1930-2126.
https://doi.org/10.15376/biores.13.4.7232-7243

Hodoušek, M.; Böhm, M.; Součková, A.; Hýsek, S.
Effect of Moisture Content on the Air Permeability of Oriented Strand Boards
Bioresources. 2018, 13(3), 4856-4869. ISSN 1930-2126.

Hýsek, S.; Podlena, M.; Böhm, M.; Bartsch, H.; Wenderdel, C.
Effect of Cold Plasma Surface Pre-treatment of Wheat Straw Particles on Straw Board Properties
Bioresources. 2018, 13(3), 5065-5079. ISSN 1930-2126.

Podlena, M.; Hysek, S.; Procházka, J.; Böhm, M.; Bomba, J.
Axial Loading of Different Single-pin Dowels and Effect on Withdrawal Strength
Bioresources. 2018, 13(3), 5179-5192. ISSN 1930-2126.

Hýsek, S.; Sikora, A.; Schönfelder, O.; Böhm, M.
Physical and Mechanical Properties of Boards Made from Modified Rapeseed Straw Particles
Bioresources. 2018, 13(3), 6396-6408. ISSN 1930-2126.

Oberhofnerová, E.; Pánek, M.; Böhm, M.
Effect of Surface Pretreatment with Natural Essential Oils on the Weathering Performance of Spruce Wood
Bioresources. 2018, 13(3), 7053-7070. ISSN 1930-2126.

Hýsek, S.; Šedivka, P.; Böhm, M.; Schönfelder, O.; Beran, R.
Influence of Using Recycled Polyurethane Particles as a Filler on Properties of Polyurethane Adhesives for Gluing of Wood
Bioresources. 2018, 13(2), 2592-2601. ISSN 1930-2126.

Částkova, T.; Hýsek, S.; Sikora, A.; Schönfelder, O.; Böhm, M.
Chemical and Physical Parameters of Different Modifications of Rape Straw (Brassica napus L.)
Bioresources. 2018, 13(1), 104-114. ISSN 1930-2126.
https://doi.org/10.15376/biores.13.1.104-114

Salem, M.Z.M.; Böhm, M.; Šedivka, P.; Nasser, R.A.; Ali, H.M.; Elgat, W.A.A.A.
Some Physico-mechanical Characteristics of Uncoated OSB ECO-products Made from Scots Pine (Pinus sylvestris L.) and Bonded with pMDI Resin
Bioresources. 2018, 13(1), 1814-1828. ISSN 1930-2126.
https://doi.org/10.15376/biores.13.1.1814-1828

Salem, M.Z.M.; Böhm, M.; Nasser, R.A.
Measuring the Formaldehyde Content from Different Types of Oriented Strand Board Manufactured with Different Thicknesses and Glued with Different Resins
Drvna Industrija. 2017, 68(2), 173-178. ISSN 0012-6772.
https://doi.org/10.5552/drind.2017.1640

Podlena, M.; Bohm, M.; Mucka, M.; Bomba, J.
Determination of the Bending Moment of a Dowel and Tenon Joint on Window Profile IV 92 of a Wooden Window
Bioresources. 2017, 12(2), 4202-4213. ISSN 1930-2126.
https://doi.org/10.15376/biores.12.2.4202-4213

Hodoušek, M.; Dias, A.M.P.G.; Martins, C.; Marques, A.F.S.; Böhm, M.
Comparison of Non-Destructive Methods Based on Natural Frequency for Determining the Modulus of Elasticity of Cupressus lusitanica and Populus x canadensis
Bioresources. 2017, 12(1), 270-282. ISSN 1930-2126.
https://doi.org/10.15376/biores.12.1.270-282

Hýsek, S.; Wimmer, R.; Böhm, M.
Optimal Processing of Flax and Hemp Fibre Nonwovens
Bioresources. 2016, 11(4), 8522-8534. ISSN 1930-2126.
https://doi.org/10.15376/biores.11.4.8522-8534

Srba, J.; Böhm, M.; Beránková, J.; Trgala, K.; Orálková, R.; Velarde, G.
Estimation of Air Leakage Rate of Wood-based Residential Buildings Constructed in the Czech Republic in the Years 2006-2014 Using Blower Door Test
Wood Research. 2016, 61(4), 599-605. ISSN 1336-4561.

Salem, M.Z.M.; Nasser, R.A.; Zeidler, A.; Elansary, H.O.; Aref, I.M.; Böhm, M.; Ali, H.M.; Ahmed, A.I.
Methylated Fatty Acids from Heartwood and Bark of Pinus sylvestris, Abies alba, Picea abies, and Larix decidua: Effect of Strong Acid Treatment
Bioresources. 2015, 10(4), 7715-7724. ISSN 1930-2126.

Salem, M.Z.M.; Zeidler, A.; Böhm, M.; Mohamed, M.E.A.; Ali, H.M.
GC/MS Analysis of Oil Extractives from Wood and Bark of Pinus sylvestris, Abies alba, Picea abies, and Larix decidua
Bioresources. 2015, 10(4), 7725-7737. ISSN 1930-2126.

Šedivka, P.; Bomba, J.; Böhm, M.; Boska, P.
Influence of Temperature on the Strength of Bonded Joints
Bioresources. 2015, 10(3), 3999-4010. ISSN 1930-2126.

Šedivka, P.;Bomba, J.; Böhm, M.; Zeidler, A.
Determination of Strength Characteristics of Construction Timber Strengthened with Carbon and Glass Fibre Composite Using a Destructive Method
Bioresources. 2015, 10(3), 4674-4685. ISSN 1930-2126.

Hodoušek, M.; Böhm, M.; Lemaster, R.L.; Bureš, M.; Beránková, J.; Cvach, J.
Air Permeation Rate of Oriented Strand Boards (OSB/3 and OSB/4)
Bioresources. 2015, 10(1), 1137-1148. ISSN 1930-2126.

Procházka, J.; Böhm, M.; Sviták, M.
Diverse Infulence of User-economic Aspects to Truss and Rafter Roof Systems and their Comparisons
Wood Research. 2014, 59(3), 449-458. ISSN 1336-4561.

Bomba, J.; Šedivka, P.; Böhm, M.; Devera, M.
Influence of Moisture Content on the Bond Strength and Water Resistance of Bonded Wood Joints
Bioresources. 2014, 9(3), 5208-5218. ISSN 1930-2126.

Salem, M.Z.M.; Böhm, M.
Understanding of Formaldehyde Emissions from Solid Wood: An Overview
Bioresources. 2013, 8(3), 4775-4790. ISSN 1930-2126.

Salem, M.Z.M.; Böhm, M.; Srba, J.
Evaluation of Mechanical Properties and Formaldehyde Emission of Plywood Manufactured for Construction Applications
Drvna Industria. 2013, 64(2), 87-93. ISSN 0012-6772.

Salem, M.Z.M.; Zeidler, A.; Böhm, M.; Srba, J.
Norway Spruce (Picea abies [L.] Karst.) as a Bioresource: Evaluation of Solid Wood, Particleboard, and MDF Technological Properties and Formaldehyde Emission
Bioresources. 2013, 8(1), 1199-1221. ISSN 1930-2126.

Salem, M.Z.M.; Böhm, M.; Barčík, S.; Srba, J.
Inter-laboratory comparison of formaldehyde emission from particleboard using ASTM D 6007-02 method
European Journal of Wood and Wood Products. 2012, 70(5), 621-628. ISSN 0018-3768.
https://doi.org/10.1007/s00107-011-0593-4

Böhm, M.; Salem, M.Z.M.; Srba, J.
Formaldehyde emission monitoring from a variety of solid wood, plywood, blockboard and flooring products manufactured for building and furnishing materials
Journal of Hazardous Materials. 2012, 221 68-79. ISSN 0304-3894.
https://doi.org/10.1016/j.jhazmat.2012.04.013

Salem, M.Z.M.; Böhm, M; Srba, J; Beránková, J.
Evaluation of formaldehyde emission from different types of wood-based panels and flooring materials using different standard test methods
Building and Environment. 2012, 49 86-96. ISSN 0360-1323.
https://doi.org/10.1016/j.buildenv.2011.09.011

Salem, M.Z.M.; Böhm, M; Beránková, J.; Srba, J.
Effect of some manufacturing variables on formaldehyde release from particleboard: Relationship between different test methods
Building and Environment. 2011, 46(10), 1946-1953. ISSN 0360-1323.
https://doi.org/10.1016/j.buildenv.2011.04.004

Salem, M.Z.M.; Böhm, M.; Barčík, S.; Beránková, J.
Formaldehyde Emission from Wood-Based Panels Bonded with Different Formaldehyde-Based Resins
Drvna Industruja. 2011, 62(3), 177-183. ISSN 0012-6772.
https://doi.org/10.5552/drind.2011.1102

Böhm, M.; Šedivka, P.; Bomba, J.; Reisner, J.
Strength Characteristics of OSB in Bending - Difference between Upper and Lower Panel Faces
Drvna Industruja. 2011, 62(3), 123-127. ISSN 0012-6772.
https://doi.org/10.5552/drind.2011.1036

Böhm, M.
The Influence of Moisture Content on Thickness Swelling and Modulis of Elasticity in Oriented Strand Board Bending
Wood Research. 2009, 54(4), 79-90. ISSN 1336-4561.